Table of Contents
Advertisement
OutdoorAP_ConnectingUp.fm
Connecting cables to the HiPath Wireless Outdoor AP
Fitting a power supply adapter
4.4 Fitting a power supply adapter
Warning
Power supply cables may only be connected when the power is turned off. Start up the HiPath
Wireless Outdoor AP only after screwing the housing cover in place again so that protection from
touching live parts is restored.
34
Figure 20
Position of the connector when inserted in the socket of the housing
2. Press the connector into the socket in the housing until it engages.
3. Secure the power cable with a strain relief clamp.
The HiPath Wireless Outdoor AP supports only the 110-230 V AC power supply
adapter.
HiPath Wireless Outdoor AP Installation Guide
9034532, October 2009
Advertisement
Table of Contents
