Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
GB
10
S ystem Information
The following illustrates the intial setting of the SYSTEM INFORMATION menu.
G
It displays the basic system information.
Because you can connect maximum of 2 HDD's, if the capacity for each (GB: Giga Byte)
and the DISK END MODE of the RECORD MODE SETUP menu are set to OVER-
WRITE, you can find out in the CAPACITY(GB) and OVERWRITE(#) the information
about how many times a HDD is currently being overwritten.
VERSION indicates the software version installed on the system and MAC ADDRESS indi-
cates the MAC Address entered in the system.
3-25
SYSTEM INFORMATION
HDD1
HDD2
CAPACITY(GB)
80.00
NO
OVERWRITE(#)
00000
NO
VERSION
SHR301 3.11
MAC ADDRESS
ff-ff-ff-ff-ff-ff
11
S CSI HDD BACKUP
You shall connect this DVR to an external SCSI HDD with a connector to backup or replay the
video or audio signal stored in the main body HDD. The external SCSI HDD is the only backup
device of this DVR.
Here comes the BACKUP SETUP menu.
BACKUP SETUP
TIME RANGE
FROM RECORD EVENT LIST
FROM ALARM EVENT LIST
SEARCH & PLAY OF BACKUP
OVERWRITE
SCSI ERASE
BACKUP SETUP backups or replays the video or audio signal stored in the main body HDD
in the external SCSI HDD through the SCSI.
(1) TIME RANGE
If you choose TIME RANGE in the BACKUP SETUP menu, the detailed TIME RANGE
setup screen will appear. You shall designate the start and finish time of backup on your own
so that TIME RANGE can save the video and audio signal in the SCSI HDD only in the
designated period.
TIME RANGE
FROM
TO
[START]
SYSTEM HDD 70.8GB / 80.8 GB [1]
SCSI HDD
Press the JOG(
) or UP(
), DOWN(
be highlighted. Then press the SET/STILL button(
button to move to the next selection item(DATE or TIME). Then press the JOG(
DOWN(
) button to type in the date, start time, and finish time of the image to be backed up
and press the SET/STILL button(
OFF
OFF
DATE
2003.01.01
TIME
12:00:00
DATE
2003.01.01
TIME
12:00:00
15.1GB / 18.1 GB [1]
) button to move the cursor. The selected items will
) and the LEFT(
) or RIGHT(
)
) or UP( ),
) to wrap up the selection.
GB
3-26
Advertisement
Table of Contents
