Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
GB
5
Record Setup
The following illustrates the intial setting of the RECORD MODE SETUP menu.
x AUDIO RECORD
Set to ON to record video and audio at the same time, or set to OFF to record video only.
Audio is input and recorded at 6.3 Kbps regardless of the recording field rate of the video
[ON/OFF].
y PICTURE QUALITY
Picture quality is divided into four levels. Set to VERY HIGH for the best picture quality,
or set to HIGH, NORMAL, or LOW in the descending order of qualty. The user can select
the desired quality. [VERY HIGH/HIGH/NORMAL/LOW]
➂ PICTURE RATE
Set the picture rate for the input video. If the input video signal is NTSC, a maximum of
60 FPS (Fields Per Second) can be recorded; if it is PAL, a maximum of 50 FPS can be
recorded.
1) NTSC
[60.00FPS/30.00FPS/15.00FPS/10.00FPS/7.50FPS/5.00FPS/2.50FPS/
1.00FPS/0.50FPS]
2) PAL
[50.00FPS/25.00FPS/12.50FPS/8.33FPS/6.25FPS/5.00FPS/2.50FPS/
1.00FPS/0.50FPS]
3-15
RECORD MODE SETUP
AUDIO RECORD
OFF
PICTURE QUALITY
NORMAL
PICTURE RATE
30.00FPS
DISK END MODE
STOP
DISK END BUZZER
ON
RECORD TIME MARK
ON
TIME MARK POSITION
RIGHT
Note
Note
The following table shows how long it takes to fill the 40GB HDD with respect to each field
rate when the video signal is NTSC and PAL respectively.
(Recording time for each field rate may slightly vary depending on the type of input
video singal.)
Time-Lapse Mode
Picture Rate
VERY HIGH
HIGH
60.00 FPS
11 H
15 H
30.00 FPS
22.0 H
30.0 H
15.00 FPS
33.0 H
60.0 H
10.00 FPS
44.0 H
90.0 H
NTSC
7.50 FPS
66.0 H
120.0 H
5.00 FPS
100.0 H
180.0 H
2.50 FPS
200.0 H
360.0 H
1.00 FPS
500.0 H
900.0 H
0.50 FPS
1000.0 H
1800.0 H
50.00 FPS
13.2 H
15.0 H
25.00 FPS
26.4 H
30.0 H
12.50 FPS
52.8 H
60.0 H
8.33 FPS
79.2 H
90.0 H
PAL
6.25 FPS
105.0 H
120.0 H
5.00 FPS
132.0 H
150.0 H
2.50 FPS
262.0 H
300.0 H
1.00 FPS
660.0 H
750.0 H
0.50 FPS
1320.0 H
1500.0 H
➃
DISK END MODE
G
If you select STOP, recording will stop when you consume the full HDD space.
If you select CONTINUE, the new data will be recorded while overwriting the existing
G
data in the HDD from the oldest one. The relative positions where the recorded data are
being stored in the HDD will be indicated on the screen in a bar format. If the DISK
END MODE is set to STOP, in addition, the remaining HDD capacity will be indicated
in percentage (%). Also, if the DISK END MODE is set to STOP, HDD FREE SPACE
will be shown at the bottom of the menu, but if it is set to CONTINUE, it will not be
shown. [STOP/CONTINUE]
GB
NORMAL
LOW
20 H
26.0 H
40.0 H
52.0 H
80.0 H
104.0 H
120.0 H
156.0 H
160.0 H
207.0 H
240.0 H
310.0 H
480.0 H
610.0 H
1200.0 H
1500.0 H
2400.0 H
3000.0 H
20.0 H
24.0 H
40.0 H
48.0 H
80.0 H
96.0 H
120.0 H
144.0 H
160.0 H
192.0 H
200.0 H
240.0 H
400.0 H
480.0 H
1000.0 H
1200.0 H
2000.0 H
2400.0 H
3-16
Advertisement
Table of Contents
