Setting Of Date, Time And Screen - Samsung SHR-3010 User Manual

Samsung digital video recorder user's manual
Hide thumbs Also See for SHR-3010:
Table of Contents

Advertisement

DIGITAL VIDEO RECORDER
GB
Each menu item
x
CLOCK/DISPLAY MODE SETUP
CLOCK/DISPLAY MODE SETUP
DATE
2002-01-01
TIME
12:00:00
DATE DISPLAY TYPE
YYYY-MM-DD
DATE & TIME DISPLAY
ON
DATE & TIME POSITION
RIGHT
STATUS DISPLAY
ON
STATUS POSITION
LEFT
y
RECORD MODE SETUP
RECORD MODE SETUP
AUDIO RECORD
OFF
PICTURE QUALITY
NORMAL
PICTURE RATE
30.00FPS
DISK END MODE
STOP
DISK END BUZZER
ON
RECORD TIME MARK
ON
TIME MARK POSITION
RIGHT
ALARM RECORD SETUP
ALARM RECORD SETUP
ALARM ENABLE
OFF
ALARM DETECT TYPE
N.O.
ALARM BUZZER
ON
MAIN ALARM TIME
10SECOND
PRE ALARM TIME LIMIT
2SECOND
POST ALARM TIME LIMIT
OFF
MAIN ALARM PICTURE RATE 30.00FPS
MOTION DETECTION
OFF
SET AREA & SENSITIVITY
TIMER RECORD SETUP
TIMER RECORD SETUP
TIMER
DAY
START
END
FIELD RATE
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
Caution
Caution
Upon shipment from the factory, the values of the menu are set as follows.
3-13
SYSTEM SETUP
SYSTEM SETUP
PASSWORD
****
PASSWORD LOCK
OFF
HDD ERASE
OFF
FACTORY RESET
OFF
MENU SCREEN
DARK GRAY
LANGUAGE
ENGLISH
COMMUNICATION SETUP
COMMUNICATION SETUP
BAUD RATE
115,200
NETWORK ACCESS
ON
IP ADDRESS
0. 0. 0. 0
GATEWAY
0. 0. 0. 0
SUBNET MASK
0. 0. 0. 0
NETWORK USER ID
****
NETWORK USER PWD
****
SYSTEM INFORMATION
SYSTEM INFORMATION
HDD1
HDD2
CAPACITY(GB)
80.00
NO
OVERWRITE(#)
00000
NO
VERSION
SHR301 3.11
MAC ADDRESS
ff-ff-ff-ff-ff-ff

BACKUP SETUP
BACKUP SETUP
TIME RANGE
--.--
FROM RECORD EVENT LIST
--.--
FROM ALARM EVENT LIST
--.--
SEARCH & PLAY OF BACKUP
--.--
--.--
OVERWRITE
OFF
--.--
SCSI ERASE
OFF
--.--
--.--
--.--
4

Setting of Date, Time and Screen

The following illustrates the intial setting of the CLOCK/DISPLAY MODE SETUP menu.
CLOCK/DISPLAY MODE SETUP
DATE
TIME
DATE DISPLAY TYPE
DATE & TIME DISPLAY
DATE & TIME POSITION
STATUS DISPLAY
STATUS POSITION
x DATE
Set the current date.
y TIME
Time can be entered in the form of 24 hours.
Caution
Caution
Be sure to set the date and time to the current date and time.
➂ DATE DISPLAY TYPE
There are 3 date forms to be displayed. You can set in a convenient manner to see.
[YYYY-MM-DD/DD-MM-YYYY/MM-DD-YYYY]
➃ DATE & TIME DISPLAY
Set to ON to display the date and time on the screen, or set to OFF to not display them.
[ON/OFF]
➄ DATE & TIME POSITION
Set the location on the screen where the date and time will be displayed. Set to LEFT to
display it on the top left of the screen, or set to RIGHT to display it on the top right of the
screen. [LEFT/RIGHT]
➅ STATUS DISPLAY
Set to ON to display the system status, such as recording, system lock, to which HDD the
data is being stored, remaining HDD capacity, and playback information when playing the
recorded video; or set to OFF to not display them. [ON/OFF]
➆ STATUS POSITION
Set the location on the screen where the system status will be displayed. Set to LEFT to
display it on the top left of the screen, or set to RIGHT to display it on the top right of the
screen. [LEFT/RIGHT]
2002-01-01
12:00:00
YYYY-MM-DD
ON
RIGHT
ON
LEFT
3-14
GB

Advertisement

Table of Contents
loading

Table of Contents