Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
GB
3) SIZE
Set the size of the area currently selected. Press the UP(
the area vertically, or press the DOWN(
Press the RIGHT(
LEFT(
) button to decrease the size of the area horizontally. After setting the size, press
the SET/STILL(
4) MOVE
Set the position of the area currently selected. Press the UP(
change the position of the area vertically, or press the LEFT(
to change the position of the area horizontally. After setting them all up, press the
SET/STILL(
) button to move the cursor to the AREA item so that you can set each
item for other areas.
3-21
AREA=2
LEVEL=OFF
[SIZE][MOVE]
AREA 2
) button to increase the size of
) button to decrease the size of the area vertically.
) button to increase the size of the area horizontally, or press the
) button to move the curstor so that you can set the MOVE item.
AREA=2 LEVEL=MIDDLE [SIZE][MOVE]
) or DOWN(
) button to
) or RIGHT(
AREA=2 LEVEL=MIDDLE
[SIZE][MOVE]
7
Reservation Record Setup
) button
The following illustrates the intial setting of the TIMER RECORD SETUP menu.
TIMER RECORD SETUP
TIMER
DAY
START
END
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
OFF
---
--:-- --:--
Timer recording enables the system to automatically record when you are not present so that
G
the recording is performed on the desired day at the desired time with the desired field rate.
First position the cursor at the line where TIMER row is set to OFF to set it to ON, select
the desired day from the DAY row, and enter the recording start and end time into START
and END row respectively. Also, set the field rate to be applied during recording in the
FIELD RATE row. If you set the DAY from SUN to SAT, the timer recording setting is
applied only to the corresponding days, but if you set it to DAILY, the timer recording
setting is applied to all days of the week. FIELD RATE can be set from 0.50 FPS to 60 FPS
if the input video signal is NTSC and from 0.50 FPS to 50 FPS if it is PAL. Once the timer
recording is set, the recording will be made on the corresponding day for the duration of
entered time. Other recording settings, except the field rate, follow the basic recording
settings. To force stop the recording, press and hold the STOP(
Then, the recording will pause for 5 seconds. If no action is performed by the user for 5
seconds, the system determines whether the timer recording setup time is elapsed and
resumes the recording it not. To completely stop the recording, go into the menu within 5
seconds to set the TIMER item of the corresponding line to OFF.
Timer recording can be set for up to 11 different times.
GB
FIELD RATE
--.--
--.--
--.--
--.--
--.--
--.--
--.--
--.--
--.--
I
) button for 3 seconds.
3-22
Advertisement
Table of Contents
