Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
GB
10
S ystem Information
The following illustrates the intial setting of the SYSTEM INFORMATION menu.
It displays the basic system information.
If the capacity for each (GB: Giga Byte) and the DISK END MODE of the RECORD
MODE SETUP menu are set to CONTINUE, you can find out in the CAPACITY(GB)
and OVERWRITE(#) the information about how many times a HDD is currently being
overwritten.
VERSION indicates the software version installed on the system and MAC ADDRESS
indicates the MAC Address entered in the system.
3-25
SYSTEM INFORMATION
HDD1
HDD2
CAPACITY(GB)
80.00
NO
OVERWRITE(#)
00000
NO
VERSION
SHR301 3.11
MAC ADDRESS
ff-ff-ff-ff-ff-ff
11
B ackup Setting (SCSI HDD BACKUP)
You shall connect this DVR to an external SCSI HDD with a connector to backup or replay the
video or audio signal stored in the main body HDD. The external SCSI HDD is the only backup
device of this DVR.
Here comes the BACKUP SETUP menu.
BACKUP SETUP
BACKUP FROM RECORD EVENT LIST
BACKUP FROM ALARM EVENT LIST
SEARCH & PLAY OF BACKUP
SCSI ERASE
BACKUP SETUP backups or replays the video or audio signal stored in the main body HDD
in the external SCSI HDD through the SCSI.
(1) BACKUP FROM RECORD EVENT LIST
BACKUP FROM RECORD EVENT LIST is for backing up fromto back up using the
record event list. Whenever the user presses the RECORD key in the HDD of the main unit
to record, or records for long period of time, an event list is generated at the certain intervals
of certain time. This function is for convenientis to backup of the chosen location, you want
conveniently using the generatedis list. The Ffollowing screen shows the detailed setting
forof BACKUP FROM RECORD EVENT LIST. It displays the Event (RECORD
START), and the date and the time when it is recorded in the HDD. To exit this screen, press
the MENU button. It will return to The MENU screen will reappear.
RECORD EVENT BACKUP
ID
EVENT
01 RECORD START 2003-04-02 13:29:50
02 RECORD START 2003-04-02 13:27:39
03 RECORD START 2003-04-02 12:54:30
04 RECORD START 2003-04-02 12:34:35
EXIT = [MENU] SELECT = [SET]
Use the JOG(
) or UP(
), DOWN(
displayed on the item selected. Move to the part of the EVENT LIST that you want to back up
and press the SET/STILL(
) button to display the screen.
The following screen shows the example of selecting ID 0 2.
OFF
[1/4]
DATE
TIME
) to move the cursor. The highlighted cursor will be
GB
3-26
Advertisement
Table of Contents
