Retrieval Menu View - Samsung SHR-3010 User Manual

DIGITAL VIDEO RECORDER
GB
1

Retrieval Menu View

Retrieval Menu Enter
Press the SEARCH button to retrieve recorded data.
If doing so, following screen appears.
Note Note
- All recorded data can be searched if the system is in the Live screen mode, the
recording mode, or the playback mode.
- If in in the playback mode, when you try to search the recorded data to play back,
a newly searched data is played back regardless of which data has previosly been
played back.
- While the user is in the menu, pressing the SEARCH button will not take you to the
search menu. To go into the search menu, first exit the menu.
Menu Move
Use the UP( ) or DOWN(
highlighted cursor is shown by the selected item. Then, press the SET/STILL(
to go into a sub-menu. In the sub-menu, you can enter enquiries for data search or select and
play back the desired data from the list of recorded data.
Retrieval Condition Enter and List Item Select
Enter enquiries for data search in the DATA & TIME SEARCH menu, and select one from
the list of recorded data in the RECORD EVENT SEARCH and ALARM EVENT
SEARCH menus. The method of entering enquiries for data search or selecting one from the
list is same as in a regular menu.
5-1
SEARCH MENU
DATE & TIME SEARCH
RECORD EVENT SEARCH
ALARM EVENT SEARCH
POWER EVENT LIST
) button to move to the desired menu item. At this time, a
) button
Upper Menu Move and Menu End
Press the SEARCH button to move from the lower menu to the upper menu or end menu.
Each Menu Item
x ➂
CLOCK/DISPLAY MODE SETUP
DATE & TIME SEARCH
DATE 2002-01-01
TIME 00:00:00
[SEARCH START]
EXIT=[SEARCH] SEARCH=[SET/STILL]
y ➃
RECORD EVENT SEARCH
RECORD EVENT SEARCH [01/04]
ID EVENT DATE TIME
01 RECORD START 2001-09-24 00:23:28
02 RECORD START 2001-09-24 00:30:00
03 RECORD START 2001-09-24 01:49:31
04 RECORD START 2001-09-24 02:00:00
EXIT=[SEARCH] SEARCH=[SET/STILL]
Caution
Caution
- When you go into the DATE & TIME SEARCH menu, the current date and time
will be displayed by the DATE and TIME fields. Enter the desired date and time to
search the recorded data.
- No list will be displayed when you go into the RECORD EVENT SEARCH, ALARM
EVENT SEARCH, and POWER EVENT LIST menus because there is no data in the
HDD when it is first shipped from the factory.
GB
ALARM EVENT SEARCH
ALARM EVENT SEARCH [01/03]
ID EVENT DATE TIME
01 ALARM START 2001-05-11 09:23:55
02 ALARM START 2001-05-14 15:22:13
03 ALARM START 2001-05-14 15:30:00
EXIT=[SEARCH] SEARCH=[SET/STILL]
POWER EVENT LIST
POWER EVENT LIST [01/08]
ID EVENT DATE TIME
01 POWER OFF 2001-09-24 00:00:52
02 POWER ON 2001-09-24 00:07:38
03 POWER OFF 2001-09-24 00:11:56
04 POWER ON 2001-09-24 00:23:24
05 POWER OFF 2001-09-24 00:39:12
06 POWER ON 2001-09-24 01:47:06
07 POWER OFF 2001-09-24 02:52:10
08 POWER ON 2001-09-24 02:55:37
EXIT=[SEARCH]
5-2