Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
GB
Viewing Screen during recording
The normal recording screen looks like this.
If the system is executing the recording function,
If the system is in the recording state due to alarm,
icon continually blinks.
If the system is in the recording state due to Motion Detection,
In this state,
If the system is in the recording state due to the timer,
If the system in the recording lock state,
It occurs when the system is connected to remote viewer program through the LAN.
3-7
2001-08-22 18:19:12
icon blinks.
icon appears. In this state,
icon appears.
icon continually blinks.
icon appears.
icon appears.
Playback screen Viewing
The normal Playback screen looks like this.
1
2001-09-24 00:23:44
The upper pointer shows the relative location of the recorded data being stored inside
the hard disk and the lower pointer shows the relative location of the data currently
being played back.
If the system is in the playback mode,
pause state, it changes to this icon ❙❙. In addition, stored data can be played back at
various speeds; when played in the forward direction at speeds other than the normal
speed, the speed is shown on the right side of the
reverse direction at speeds other than the normal speed, icon appears and the right side
of this
icon shows the speed. Possible speeds in the system for forward and reverse
directions are 1/5, 1/2, 1, 2, 5, 10, 20 times normal speed.
2001-09-24 00:23:44
It shows the recorded date and time of the data currently being played back.
GB
icon appears. And if the system is in the
icon and if it is played in the
3-8
Advertisement
Table of Contents
