Setting the Spot Out
You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
1. Use the up/down buttons () in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Spot Out>.
The number of Spot Out terminals differs according to the model.
3. Use direction buttons (◄ ►) to move to a desired item,
and set the value.
• Spot Out 1 : It supports auto sequence and single mode by
default, and additionally supports 4-split modes if selected
<Multi Spot> out.
• Spot Out 2 : It supports auto sequence and single mode.
• Set Mode : A window for "Set Spot Out" appears and you
can set the channel for it.
You can set the dwell time between the screen switching in
"Setting the Device > Camera > SEQ-Dwell Time".
(Page 43)
• Event Display : Sets the duration for the Spot Out on an
event.
If selected <OFF>, an event will not output to the Spot Out.
M
You can setup using the mouse right button in Live screen.
Refer to "Spot Out". (Page 29)
If selected <Multi Spot> double frame function is deactivated.
4. When the Spot Out is done, press <OK>.
Setting the Screen Mode
You can configure the Live screen and Split Screens.
Using the mouse may help make setup easier.
1. Use the up/down buttons () in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Mode>.
3. Use direction buttons (◄ ►) to move to a desired item,
and set the value.
• Live Screen : Select split modes for the Live screen.
The basic option includes four-split mode screen.
• Play Screen : Displays the split screen to be displayed while
playing the video.
4. When the screen mode setup is done, press <OK>.
Monitor
Spot Out
Monitor
Mode
Spot Out 1
Multi Spot
Set Mode
SEQ
Spot Out 2
SEQ
Set Mode
Event Display
OFF
OK
Cancel
Monitor
Spot Out
Monitor
Mode
Spot Out 1
Multi Spot
Set Spot Out
Set Mode
SEQ
Spot Out 2
SEQ
Set Mode
Event Display
1
2
3
OFF
OK
OK
Cancel
Monitor
Mode
Monitor
Spot Out
Live Screen
Play Screen
Live
OK
Cancel
English _51
All
All
All
All
4
Play