Ethernet Settings - Intermec PC23 User Manual

Ethernet Settings

PC23 and PC43 Desktop Printer User Manual
If your network uses a DHCP server to assign IP addresses, the IP
address appears in the lower left corner of the screen after the
printer connects to the network.
• For an icon printer, connect to the printer using PrintSet and
print a configuration label. The label includes the IP address.
If you are not using a DHCP server to automatically assign IP
addresses to devices in your network, you must set a static IP
address and other network information manually. Continue with
the next step.
2 For a non-DHCP network:
• For an LCD printer, from the Main Menu select Settings >
Communications > Ethernet and change the settings as
needed.
• For an icon printer, configure the Ethernet settings through
PrintSet.
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
• From the printer Main Menu, select Settings > Communications
> Ethernet.
• From the printer home page, click the Configure tab >
Communications > Ethernet.
Chapter 3 —
61