Intermec PC23 User Manual page 62

Chapter 2 —
50
Setting
Media Margin (X)
Clip Default
Media Type
Print Method
Media Calibration
Mode
Description
Sets the width of the margin from the
left edge of the label along the
printhead to the edge of the printable
area. Unit of measurement is defined
in the Unit of Measurement parameter.
INTERMEC
6001 36th Ave W
Everett WA 98203
Determines if the printer prints items
outside the printable area of the label.
When this is set to Off, the printer
returns an error if any part of a bar
code label cannot be printed because
that part extends beyond the printable
area. When this is set to On, the printer
prints all bar code labels, but may also
print unreadable, incomplete labels.
Selects the type of media that is loaded
in the printer.
Selects the method of printing that the
printer is using.
Selects the mode the printer uses to
calibrate media. Use Slow if the printer
has trouble identifying gaps or marks
in media.
PC23 and PC43 Desktop Printer User Manual
Default
Variable
Off
Media With
Gaps
Variable
Fast