How To Restore Default Settings To The Printer; Restore Default Settings Using The Printer Buttons - Intermec PR2 User Manual

Chapter 3 — Troubleshoot and Maintain the Printer

How to Restore Default Settings to the Printer

Restore Default Settings Using the Printer Buttons

34
When you restore factory default settings to the printer, the printer
returns to its original out-of-box state. Use one of these methods to
restore default settings to the printer:
Use the Print and Power buttons on the printer.
•
• Go to the printer web page through your wireless network. You
need to know your printer IP address.
• Use PrintSet version 5.2 or later through a USB connection to your
host PC.
The easiest way to restore factory default settings to your printer is to
use the Print and Power buttons.
1 Make sure the printer is off.
2 Open the media door.
3 Press and hold the Print button, and then press and release the
Power button to turn on the printer.
The Intermec Ready-to-Work™ indicator starts to blink.
4 Continue to hold the Print button until the Ready-to-Work
indicator turns on and stays on.
During this process, the Connectivity icon and Critical Error icon
may turn on and off.
5 Release the Print button.
6 If you want the printer to print a message, make sure that media is
installed in the printer.
7 Close the media door.
When the process is complete, the printer automatically restarts.
PR2 and PR3 Mobile Receipt Printer User Manual