Wireless 802.11 Security Settings - Intermec PC23 User Manual

Chapter 3 —

Wireless 802.11 Security Settings

74
Setting Description
(IPv4) IP Address Sets the unique network-level address
that is assigned to each device in a
TCP/IP network (IPv4).
Subnet Mask Sets a number that defines the range of
IP addresses that can be used in a
TCP/IP network.
Default Router Sets the IP address of a router that is
used when a device sends a packet to
another subnet or to an unknown
destination.
DHCP Response Sets if the printer receives DHCP
responses by broadcast or unicast.
(IPv6) IP Sets how the printer obtains an IP
Assignment address (for IPv6 networks).
Method
(IPv6) IP Address Sets the unique network-level address
that is assigned to each device in a
TCP/IP network (IPv6).
This section describes the 802.11 security settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Security.
• From the printer home page, click the Configure tab >
Communications > Wireless 802.11.
Setting Description
Security Type Selects the protocol the radio uses to
verify its identity and makes sure that
it is authorized to communicate on
the wireless network.
Association Selects the security method that the
radio uses to get access to the wireless
network.
PC23 and PC43 Desktop Printer User Manual
Default
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
0.0.0.0
Default
None
Open/WEP