Use The Battery Base - Intermec PC23 User Manual

Use the Battery Base

PC23 and PC43 Desktop Printer User Manual
Battery Base LEDs While Printer is Off
LEDs
After you charge the battery base, you can use it to supply power to the
PC43d printer.
To use the battery base, the PC43d must be installed on the base
correctly.
1 Charge the battery base.
2 Disconnect the power cable from the base.
3 Turn the printer on. The base LEDs turn off.
4 To see the current battery charge level, press the Charge Level
button on the front of the base. The base LEDs turn on to show the
current charge level, and then turn off after a few seconds to save
power.
Battery Charge Level
95% to 100%
75% to 94%
50% to 74%
25% to 49%
0% to 24%
Battery out of charge temp range.
Battery error.
Chapter 1 —
23