Intermec PC23 User Manual page 156

Chapter A —
144
These settings are not accessible unless the printer has a serial
connection to a PC.
Setting
Baud Rate
Data bits
Parity
Stop Bits
Hardware
ENQ/ACK
XON/XOFF To
XON/XOFF From
New Line Character
Description
Transmission speed in bits per second
(bps) for the serial port.
Number of bits that define a character or
byte.
Specifies how the printer checks the
integrity of the transmitted data.
Number of bits sent at the end of every
character to allow the receiving signal
hardware to detect the end of a character
and to resynchronize with the character
stream.
Specifies if hardware flow control
(RTS/CTS) is used to manage the rate of
data transmission between the device and
the host.
Specifies if software flow control
(ENQ/ACK) is used to manage the rate of
data transmission between the device and
the host.
Specifies if software flow control
(XON/XOFF) is used to manage the rate of
data transmission to the host.
Specifies if software flow control
(XON/XOFF) is used to manage the rate of
data transmission from the host.
Defines the characters that the printer
echoes to the host to indicate that it has
moved to a new line.
PC23 and PC43 Desktop Printer User Manual
Default
115200
8
None
1
Disable
Disable
Disable
Disable
CR/LF