Intermec PC23 User Manual page 51

PC23 and PC43 Desktop Printer User Manual
8 Thread the media into the slot in the cutter accessory and out
through the front of the cutter.
9 Close the printer lid until it snaps shut.
10 Turn the printer on.
If you are using an icon printer, you must use Intermec PrintSet to
configure the cutter. For LCD printers, continue with the next step.
11 After the printer finishes starting up, press
12 Select Settings > Printing > Cutter .
13 In the Cutter Control options, select Automatic.
14 Press . A "Save Changes?" message appears.
15 Press to save your changes and exit the Settings menu.
16 Adjust the media feed as required by the printer command
language you are using.
Chapter 2 —
.
39