Upgrade Firmware From The Printer Web Page; Upgrade Firmware Using Printset - Intermec PR2 User Manual

Chapter 3 — Troubleshoot and Maintain the Printer

Upgrade Firmware from the Printer Web Page

Upgrade Firmware Using PrintSet

32
To upgrade printer firmware from the printer web page, you need to
turn on the printer and connect to your Wi-Fi network.
Note: If you are not using a DHCP network and you do not know your
printer IP address, you must configure Wi-Fi settings using Intermec
PrintSet 5.2 or later with a USB connection.
1 On your desktop PC, open a web browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
3 Click Maintenance. The firmware upgrade page appears.
4 When prompted, type your Username and Password. The default
username is admin and the default password is pass.
5 Click Login.
6 Click Browse to locate the upgrade file.
7 Double-click the file, and then click Upgrade.
On your printer, the Intermec Ready-to-Work™ indicator and
Critical Error LED blink to indicate firmware is being upgraded.
When the upgrade is complete, the Ready-to-Work indicator stays
on.
To upgrade your printer firmware using PrintSet 5.2 or later, you
connect your printer to a desktop PC through a USB connection.
Note: The first time you create a USB connection to a desktop PC, you
must use Intermec InterDriver to install the appropriate driver
software on your PC.
1 Connect your printer to a desktop PC with a USB cable.
2 Download and install Intermec PrintSet 5.2 or later from the
Intermec website at www.intermec.com.
3 Use PrintSet to add your printer to PrintSet and upgrade printer
firmware.
PR2 and PR3 Mobile Receipt Printer User Manual