Command Completion And Abbreviation - D-Link 5000 Series Cli Reference Manual

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Command Mode
Policy-Class-Map Config
Class-Map Config
Router OSPF Config
BGP Router Config
Route Map Config
IPv6 Address Family
Config
Peer Template Config
Peer Template Address
Family Config
MAC Access-list Config
IPv6 Access-list Config
Management Access-list
Config
TACACS+ Config
ARP Access-List Config
User-Group Configuration
Mode
Task-Group Configuration
Mode

Command Completion and Abbreviation

When the user types enough letters of a command to uniquely identify the command keyword, the
command completion feature finishes spelling the command for the user. Once the user has entered
enough letters, simply pressing the SPACEBAR or TAB key will complete the word.
Command abbreviation lets the user execute a command when the user has entered enough letters to
uniquely identify the command. The user must, however, enter all of the required parameters and
keywords before entering the command.
Access Method
Enter
class <classname>
Note: A given classname should be created using the
command.
Enter
class-map match-all <class-map-name>
Config mode, and then use either the optional keyword
specify the Layer 3 protocol for this class.
Enter while in the Global Config mode.
router ospf
Enter
router bgp asnumber
Enter
route-map map-tag
Enter
address-family ipv6
Enter
template peer name
create a BGP peer template and to enter the Peer Template Configuration
mode.
Enter
address-family {ipv4 | ipv6)
Config mode.
Enter
mac access-list extended name
mode.
Enter
ipv6 access-list name
Enter
management access-list name
mode.
Enter
tacacs-server host
address of the TACACS+ server on your network, while in the Global
Config mode.
Enter the
arp access-list
Enter the
usergroup <usergroup-name>
Global Config mode.
Enter the
taskgroup <taskgroup-name>
Global Config mode.
15
while in the Policy Map mode.
while in the Global Config mode.
while in the Global Config mode.
while in the BGP Router Config mode,.
while in the BGP Router Config mode to
while in the Peer Template
while in the Global Config
while in the Global Config mode.
while in the Global Config
ip-addr, where
ip-addr
command while in the Global Config mode.
command while in the
command while in the
class-map
while in the Global
or to
ipv4 ipv6
is the IP