Ip Address Conflict Commands - D-Link 5000 Series Cli Reference Manual

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Source
url
url
url
5-88 write memory
This command is used to save any running configuration changes to NVRAM to ensure that the changes
will persist across a reboot. The command is effectively the same as the copy system:running-config
nvram:startup-conflg command. The confirm keyword can be used to directly save the configuration to
NVRAM without a prompt for a confirmation being presented.
write memory [confirm]
Parameters
confirm
Default
The default is None.
Command Mode
Privileged EXEC

IP Address Conflict Commands

These commands are used to troubleshoot IP address conflicts.
5-89 ip address-conflict-detect run
Use this command to run active address conflict detection. Gratuitous ARP packets for IPv4 addresses
are sent on the switch.
ip address-conflict-detect run
Destination
ias-users
nvram:tech-support-cmds
{active | backup}
(Optional) Select to directly save the configuration to NVRAM without
user prompt confirmation.
216
Description
Downloads an IAS users database file
to the system. When the IAS users file
is downloaded, the IAS user database
of the switch is replaced with the users
and their attributes included in the
downloaded file.
Downloads the file containing the list of
commands to be displayed when using
the show tech-support command.
Downloads an image from the remote
server to either image.