Getting Started; Gkp Setup Wizard - Parker AC30P User's Product Manual

4-41
Installation

Getting Started

GKP SETUP WIZARD

Purpose of the Setup Wizard
The purpose of the setup wizard is to configure the inverter in a clear and concise manner.
First familiarize yourself with Chapter 7 Graphical Keypad, for the keypad functions.
Starting the Setup Wizard
The Setup Wizard is automatically invoked when the inverter is reset to factory default settings. The setup
wizard may be invoked at any other time by navigating to the Welcome Screen at the "top" of the menu
tree the pressing the
Running the Setup Wizard
At each point in the wizard pressing the OK key selects the displayed value and moves on to the next
step. Pressing Soft Key 1 moves back a step. Pressing the UP and DOWN keys modifies the selected
value.
Setup Wizard Stages
After selecting the required view level and language, the next option is "Set Factory Defaults". Changing this parameter to TRUE then pressing
OK resets all parameters back to the default value determined by the inverters hardware configuration. If this choice is left FALSE the setup
wizard starts with all parameters with their previously set values. Accepting each choice without change by pressing OK will result in no change to
the inverter's configuration.
The rest of the Setup Wizard consists of a several sections. Each section corresponds to a functional component of the inverter, for example:
If not required, any section may be skipped.
The default setting for all parameters depends on earlier answers and on the physical configuration of the inverter. All data entered is
automatically saved without the need for any additional commands.
Finalising Setup
Once the Setup Wizard has been run to completion the feature is automatically disabled. Re-starting the inverter will not cause the Setup Wizard
to be run again. (If it is desired to re-run the Setup Wizard, this can be achieved as detailed above in "Starting the Setup Wizard").
For complete details go to "Chapter 9 Setup Wizards".
key, Soft Key 1.
•
Application selection
•
IO Option, (includes the Encoder)
•
Analog input and output ranges.
•
Motor Data
Soft Key 1
•
Motor Control
•
Fieldbus options
•
On-board Ethernet
•
Auto tune
AC30 series Variable Speed Inverter
OK key