Ac Fed Power Wiring Connections - Parker AC30P User's Product Manual

AC
FED POWER WIRING CONNECTIONS
Feed the power supply and motor cables into the inverter under the cable clamps using the correct cable entries, and connect to the
power terminals. Tighten all terminals to the correct tightening torque; refer to the Terminal Tightening Torques table (page 4-39).
fuses
Filter
Circuit
(optional)
Breaker
AC30 series Variable Speed Inverter
Earth Earth
Earth
Stud
AC Motor
Chokes.
Only on long
cable runs >50m
Earth
Earth
Stud
Mains in Motor
Terminals Terminals
Frame K - no DB+ connect resistor between DC+ & DB)
Note: Cable clamps and earthing brackets are only
supplied with a C2 EMC Filter kit (page 4-13 for part
numbers), see page C-11 for motor termination details.
4-16
Installation
Earth
Ferrite core option
To meet C2 EMC
Standard – Frames
D – J only
Cable Clamps