Application 3: Presets Speeds - Parker AC30P User's Product Manual

APPLICATION 3: PRESETS SPEEDS

ANIN 01 (X11/01)
SPEED SETPOINT
ANIN 02 (X11/02)
SPEED TRIM
RUN
PRESET SELECT 1
PRESET SELECT 2
PRESET SELECT 3
NOT COAST STOP
NOT QUICKSTOP
TRIP RESET
Presets Speeds Application
This is ideal for applications requiring multiple discrete speed levels.
The setpoint is selected from either the sum of the analogue inputs, (as in Application 1 and known here as PRESET 0), or as one of up to seven
other pre-defined speed levels. These are selected using DIN2, DIN3 and DIN4, refer to the Truth Table above.
P
Edit parameters 1917 to
entering a negative speed setpoint.
AC30 series Variable Speed Inverter
Preset Speed 0
1916
Preset Speed 1
1917
Preset Speed 2
1918
Preset Speed 3
1919
Preset Speed 4
1920
Preset Speed 5
1921
Preset Speed 6
1922
Preset Speed 7
1923
0V 0V 0V 0
24V 0V 0V 1
0V 24V 0V 2
24V 24V 0V 3
24V 0V 0V 4
0V 0V 24V 5
24V 24V 0V 6
24V 24V 24V 7
DIGIN 01 (X13/02)
DIGIN 02 (X13/03)
DIGIN 03 (X13/04)
DIGIN 04 (X12/01)
DIGIN 05 (X12/02)
DIGIN 06 (X12/03)
DIGIN 07 (X12/02)
SEQUENCING LOGIC
Seq Stop Method
0484
P
1923 on the keypad to re-define the speed levels of PRESET 1 to PRESET 7. Reverse direction is achieved by
Application 3:
"Speed Presets"
IDEAL FOR GENERAL PURPOSE APPLICATIONS
REQUIRING MULTIPLE DISCRETE SPEED LEVELS
Ref Max Speed Clamp
1265
MIN /MAX SPEED
Ref Min Speed Clamp
1264
F
V
CURRENT LIMIT
V/F SHAPING
I FDBK
Rated Motor Current
Vhz Shape
0455
0422
Base Frequency
0457
Fixed Boost
0447
Installation
Acceleration Time
0486
RAMP
Deceleration Time
0487
Stop Ramp Time
0504
Quickstop Ramp Time
0508
F
V
PWM CONTROL
ANOUT 01 (X11/03) SPEED DEMAND
ANOUT 02 (X11/04)
MOTOR CURRENT
FEEDBACKS
RELAY 01
(X14/01)
if AC30V
(X14/02)
OR
RELAY 11 (X23/01)
Requires IO Option
(X23/02)
7004-01-00
RELAY 02
(X14/03)
if AC30V
(X14/04)
OR
RELAY 12
(X23/03)
Requires IO Option
(X23/04)
7004-01-00
4-32
RUNNING
NOT
TRIPPED