Menu Descriptions; Control Screen; Setup; Monitor - Parker AC30P User's Product Manual

Menu Descriptions

CONTROL SCREEN

In local sequencing mode the Control Screen menu shows the Local Setpoint, the Seed Feedback and configuration of the action of the Run key
and direction. When the inverter is not in local sequencing mode this menu shows the operating speed. The contents of the Control Screen can
be modified by the configuration.

SETUP

Parameters that may require modification once the Setup Wizard is complete.

MONITOR

This menu contains parameters commonly used to verify the correct operation of the inverter and the process.

FAVOURITES

The Favourites menu contains up to 20 parameters selected for ease of access.
To Add a Parameter to the Favourites Menu
Using the GKP, navigate to the parameter of interest.
Press and hold the OK key until the Attributes screen is shown, (hold for about 2s)
then this appears
To Remove a Parameter From the Favourites Menu
Using the GKP navigate to the parameter of interest in the Favourites menu.
Press and hold the OK key until the Attributes screen is shown, (hold for about 2s).
Press the "Remove from Favourites" soft key,

PARAMETERS

A complete collection of all the parameters in the inverter. This menu is intended for expert use.
AC30 series Variable Speed Inverter
and press the "Add to Favourites" soft key.
.
Menu Organisation
or is shown here
Press Soft Key 2 to add to or remove
from Favourites
OK Key
8-2