Control Module Removal - Parker AC30P User's Product Manual

4-19
Installation

Control Module Removal

WARNING Isolate supply before plugging or unplugging control unit to the power stack.
2.
Lift lower edge of assembly.
Note that there are two
screws used to retain the
AC30D control module. The
communications option, if
fitted, should be temporarily
removed to access one of the
two screws.
1.
Unscrew captive screw.
4.
Lift assembly away from Power Stack
3.
Slide assembly
upwards, as far as
possible, to unlatch
from unit.
AC30 series Variable Speed Inverter