Terminal Block Wire Range - Parker AC30P User's Product Manual

TERMINAL BLOCK WIRE RANGE

Wire sizes for Europe should be chosen with respect to the operating conditions and your local National Electrical Safety Installation
Requirements. Local wiring regulations always take precedence. For North American UL wire sizes refer to Appendix C: "Compliance" -
Requirements for UL Compliance.
Frame Size
Frame D
Frame E
Frame F
Frame G
Frame H
Frame J
Frame K
AC30 series Variable Speed Inverter
Power Terminals
(minimum/maximum acceptance for aperture)
0.05 - 6 mm
2
0.05 – 6 mm 2
1 - 10 mm (*16 mm )
2 2
1.3 – 25 mm 2
M8 post, accepting crimps or lugs up to width 26.5mm
(minimum 25mm 2 wire size)
M8 post, accepting crimps or lugs up to width 32mm
(minimum 25mm 2 wire size)
M12 post, accepting crimps or lugs up to width 38mm
*The larger wire size can be used provided a crimp is fitted to the wire
Installation
Earth Connections Control Terminals
M4 ring crimp 0.229 - 2.5 mm
M4 ring crimp 0.229 - 2.5 mm
M4 ring crimp 0.229 – 2.5 mm
M5 ring crimp 0.229 – 2.5 mm
M8 ring crimp 0.229 – 2.5 mm
M8 ring crimp
0.229 – 2.5 mm
Up to width 26.5mm
M8 ring crimp 0.229 – 2.5 mm
4-38
2
2
2
2
2
2
2