Using The Mac Filter Option - Ubee UBC1303 User Manual

Ubee Interactive
Label
Click the Add button to add MAC Addresses to the pass through table. The pop-up window
below appears.
Add
Enter the desired MAC Address in the field provided and click Apply. The added MAC address
then appears in the table on the MAC PassThrough screen.
To remove a MAC address from the passthrough table, check the "Remove" box to the right of
Remove
the MAC address, then click the Remove button at the bottom of the screen.
6.4.5

Using the MAC Filter Option

Use the MAC Filter option to filter MAC addresses to block Internet traffic from specific
network devices on the LAN. MAC filtering establishes a list and any host on this list is not
able to access the network through the UBC1303AB00.
You must note the MAC addresses of the devices that you want to deny Internet access.
Be sure all devices to which you potentially deny Internet access are connected to the
UBC1303AB00 network.
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Description
Using the Advanced Settings Options
66