Ubee UBC1303 User Manual page 92

Ubee Interactive
2. Enter a target IP address or URL name to ping in the space provided.
3. Enter new parameters or accept the default values.
4. Click Start Test. Field description follow the example below.
Label
Utility
Ping Test Parameters
Target
Ping Size
No. of Pings
Ping Interval
Reset Defaults
Start Test
Abort Test
Clear Results
Results
6.7.1.2 Using the Traceroute Option
The Traceroute utility determines the IP addresses of hosts in the network path. By
checking the Resolve Host names box, Traceroute tries to find which name matches the
address. Some hosts have no names, and might still be shown as IP addresses, even if
this option is active.
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Provides a drop-down menu to choose Ping or Traceroute.
Enter the IP address or URL name to which you want to send a ping.
Defines the packet size (bytes of data) to send for the ping operation. The default is 64.
Defines the number of ping commands to send to the ping target. Default is 3 pings.
Defines the interval between ping operations in milliseconds.
Resets the Ping Test Parameters to the default values when pressed.
Defines what action to take:

Start Test begins the ping.

Abort Test stops the ping.

Clear Results deletes the previous test results in the Results table.
Displays the results of the ping test.
Description
Using the Diagnostics Option
86