Using The Mac Filtering Option - Ubee DDW3611 User Manual

Ubee Interactive
SIP
ICQ
IRC666x
ICQTalk
Net2Phone
IRC7000
IRC8000
Apply
5.8

Using the MAC Filtering Option

MAC Filtering allows you to filter MAC addresses to block Internet traffic from specific
network devices on the LAN. MAC filtering establishes a list and any host on this list is not
able to access the network through the DDW3611.
Steps
To filter MAC addresses:
1. Go to Tools > Client List. Your PC and other devices are listed. Note the MAC
address of the devices you want to deny Internet access. For more information, refer
to Using the Client List Option on page
Note – Be sure all devices to which you want to deny Internet access are connected to the
DDW3611 network.
2. Click Gateway from the main menu.
3. Click MAC Filtering from the left side menu. Field descriptions are listed below the
screen example.
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
Label
Enables or disables the session initiation protocol application
layer gateway (SIP ALG). SIP ALG
packets and formats SIP message headers and SDP
body to ensure proper signaling. Note:
services prefer this function to be performed by their own
session border controller (SBC) and require the SIP ALG to be
disabled. Some IP-PBXs may require SIP ALG enabled.
Enables or disables the ICQ instant messaging program.
Enables or disables the Internet relay chat (IRC) protocol used
for text messaging.
Enables or disables the ICQTalk instant messaging program.
Enables or disables Net2Phone SIP VoIP.
Enable or disables the Internet relay chat protocol on TCP port
TCP 7000 used for text messaging and group forums.
Enable or disables the Internet relay chat protocol on UDP port
8000 used for text messaging and group forums.
Saves all screen changes when clicked.
Description
83.

Using the MAC Filtering Option

inspects protocol
Some hosted VoIP
43