Using The Diagnostics Option; Using The Tools Option - Ubee UBC1303 User Manual

Ubee Interactive
Label
Client List
Host Name
IP Address
MAC Address
Interface
6.7

Using the Diagnostics Option

Use the Diagnostics option to test network connectivity, view spectrum analyzer
information, WiFi performance and network topology.
To use Diagnostic Options:
1. Click Gateway from the main menu.
2. Click Diagnostics on the left side menu.
3. The following sub-menus are available for selection:
 Using the Tools Option on page 85
 Using the Home Topology Option on page 87
6.7.1

Using the Tools Option

Use the Tools option to test network connectivity. Two utilities are available: Ping and
Traceroute.
To test network connectivity:
1. Click Diagnostics from the left side menu.
2. Click Tools under Diagnostics.
6.7.1.1 Using the Ping Option
Use the Ping utility to test network connectivity between devices by sending a test
message to a specific device. You can also confirm the size of data sent is the same as
the size of data received.
1. Choose Ping from the drop-down menu.
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Displays the host name of the DHCP client connected to the device.
Displays the IP address of the DHCP client connected to the device.
Displays the MAC address of the DHCP client connected to the device.
Displays the method of how clients are connected to the device (for example, Ethernet LAN,
Wireless).
Description

Using the Diagnostics Option

85