Ubee Interactive
6.4.10
Using the DNS Override Option
The DNS Override option allows you to specify host IP addresses to use instead of using
Domain Name System (DNS) servers to translate host names into IP addresses.
To configure DNS Overrides:
1. Click Advanced Settings from the left side menu.
2. Click DNS Override under Advanced Settings.
Field descriptions are listed below the screen example.
Label
Enable DNS
Override
Primary DNS
Secondary DNS
Third DNS
Save/Apply
6.4.11
Using the NTP Option
The NTP (Network Time Protocol) option lets you set the UBC1303AB00 to
automatically synchronize with Internet Time servers via Simple Network Time Protocol
(SNTP). SNTP is a protocol for synchronizing the clocks of computing devices over
networks.
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Click the box to enable DNS Override.
Enter the IP address for the primary DNS.
Enter the IP address for the secondary DNS.
Enter the IP address for the third DNS.
Saves changes.
Using the Advanced Settings Options
Description
76