Using The Home Topology Option - Ubee UBC1303 User Manual

Ubee Interactive
1. Choose Traceroute from the Utility drop-down menu.
2. Enter a target IP address or URL name of which to trace a route.
3. Enter new parameter values or accept the default values.
4. Click Start Test. Field descriptions are listed below the screen example.
Label
Utility
Traceroute Parameters
Target
Max Hops
Data Size
Reset Defaults
Start Test
Clear Results
Results
6.7.2

Using the Home Topology Option

Use the Home Topology option to view the current wireless network connections for the
UBC1303AB00 Advanced Wireless Voice Gateway.
In the following screen example:
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Provides a drop-down menu to choose Ping or Traceroute.
Defines the specific IP address or domain (for example, google.com) to which you want to
trace a route.
Defines the maximum number of hops. Hops are the number of routers the traceroute
traverses. Default is 255.
Defines the data size to send for the traceroute operation. Default is 32 bytes.
Resets the Traceroute Parameters to the default values.
Defines what action to take:

Start Test begins the traceroute.

Clear Results deletes previous test results in the Results table.
Displays the results of the trace.
Description
Using the Diagnostics Option
87