Using The Mac Filtering Option - Ubee DDW365 User Manual

Ubee Interactive
4. Click IP Filtering from the left side menu. Field descriptions are listed below the
screen example.
Start Address
End Address
Enabled
Apply
6.3

Using the MAC Filtering Option

The MAC Filtering option allows you to filter MAC addresses to block Internet traffic from
specific network devices on the LAN. MAC filtering establishes a list and any host on this
list is not able to access the network through the DDW365.
Steps
To filter MAC addresses:
1. Note the MAC address of the devices that you want to deny Internet access.
Be sure all devices to which you potentially deny Internet access are connected to the
DDW365 network.
2. Click Advanced from the main menu.
3. Click MAC Filtering from the left side menu.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Defines the starting IP address to block.
Defines the ending IP address to block.
Activates the rule when Enabled is checked.
Saves changes.

Using the MAC Filtering Option

Description
42