Fuel Line Maintenance; Throttle Operation - Honda CRF1000 Shop Manual

dummyhead dummyhead
FUEL LINE
Remove the middle cowl (page 2-6).
Remove the ETC tray (page 2-11).
Remove the bolt [1] and washer [2].
Lift the fuel tank [3] by releasing its grooves [4] from the
mounting rubbers [5].
Put the grooves onto the mounting rubbers and install
the fuel tank grommet [6] into the frame boss [7].
Temporarily install the bolt and washer.
Support the fuel tank using a suitable support.
Check the fuel line [1] for deterioration, damage or
leakage. Replace the fuel line if necessary.
Also check the fuel line fittings for leakage.
Install the removed parts in the reverse order of
removal.

THROTTLE OPERATION

Check the throttle cables for any deterioration or
damage.
Check the throttle grip for smooth operation.
Check that the throttle opens and automatically closes
in all steering positions.
If the throttle grip does not return properly, lubricate the
throttle grip housing.
If the throttle grip still does not return properly, replace
the throttle cables.
With the engine idling, turn the handlebar all the way to
the right and left to ensure that the idle speed does not
change.
If the idle speed increases, check the throttle grip
freeplay and throttle cable connection.
Measure the throttle grip freeplay at the throttle grip
flange.
FREEPLAY: 2 – 6 mm (0.08 – 0.24 in)
[3]
[1]/[2]
[6]/[7] [4]
2 – 6 mm
(0.08 – 0.24 in)
MAINTENANCE
[5]
[1]
3-3