Cylinder Head Cover Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
Remove the plug pipe seals [1] and cylinder head cover
packing [2].
INSTALLATION
Install new plug pipe seals [1].
Install a new cylinder head cover packing [2].
• Install the plug pipe seals with their "OUT SIDE"
marks [3] facing up.
Clean the cylinder head [1] mating surface thoroughly.
Apply liquid sealant (TB5211C manufactured by
ThreeBond, KE45T manufactured by Shin-Etsu Silicone
or an equivalent) to the cylinder head cover packing [2]
as shown.
• Do not apply more liquid sealant than necessary.
Check that the mounting rubbers [1] are in good
condition, and replace them if necessary.
• Install the mounting rubbers with their "UP" marks
[2] facing up.
CYLINDER HEAD/VALVE/CAMSHAFT
[1]
[3]
[1]
[2]
[1]
[2]
[2]
[2]
[1]
10-5