Frame/Body Panels/Exhaust System - Service Information; Frame/Body Panels/Exhaust System Troubleshooting - Honda CRF1000 Shop Manual

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
SERVICE INFORMATION
FRAME/BODY PANELS/EXHAUST SYSTEM
GENERAL
• This section covers removal and installation of the body panels, exhaust system and sidestand.
• Always replace the exhaust pipe gaskets after removing the exhaust pipes from the engine.
• When installing the exhaust system, loosely install all of the exhaust pipe fasteners. Always tighten the exhaust clamps first,
then tighten the mounting fasteners. If you tighten the mounting fasteners first, the exhaust pipe may not seat properly.
• Always inspect the exhaust system for leaks after installation.
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
2-2