Inserting The Accessories - John Lewis JLBIOS635 User Manual

Warning! There is a risk of
burns as the food sensor
becomes hot. Be careful when
you unplug it and remove it
from the food.
Food category: casserole
1. Activate the appliance.
2. Place half of the ingredients in a baking dish.
3. Insert the tip of the food sensor exactly in the
centre of the casserole. The food sensor
should be stabilized in one place during baking.
Use a solid ingredient to achieve that. Use the
rim of the baking dish to support the silicone
handle of the food sensor. The tip of the food
sensor should not touch the bottom of a
baking dish.
4. Cover the food sensor with the remaining
ingredients.
5. Put the plug of the food sensor into the socket
located in the front frame of the appliance.
The display shows the food sensor symbol.
32
6. Press or in less than 5 seconds to set
the food core temperature.
7. Set a heating function and, if necessary, the
oven temperature.
8. To change the food core temperature, press
.
When the dish is at the set temperature, an
acoustic signal sounds. The appliance deactivates
automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from the socket
and remove the dish from the appliance.
Warning! There is a risk of
burns as the food sensor
becomes hot. Be careful when
you unplug it and remove it
from the food.

Inserting the accessories

Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
Deep pan:
Push the deep pan between the guide bars of
the shelf support.
Steam oven User Manual