Connecting The Ac Adapter - Konica Minolta FD-9 Instruction Manual

Preparations

Connecting the AC adapter

❙ ❙
Warning
• Always use the AC adapter supplied as a standard accessory or a specified replacement AC adapter, and use the AC adapter only with
an AC outlet of the rated voltage and frequency. Failure to do so may damage the FD-9 or AC adapter, or may cause electric shock or
fire.
• If the FD-9 will not be used for a long period of time, disconnect the AC adapter from the AC outlet.
• When plugging the AC adapter into an AC outlet, be sure that the prongs of the plug are clean and dry. Accumulated dirt or moisture
on the prongs of the plug may cause a fire and should be removed.
• When plugging in or unplugging a cord, be sure to hold the plug, not the cord. Do not pull on or forcibly bend the cord. Doing so may
result in broken wires.
• Do not plug in or unplug the AC adapter with wet hands. Doing so may cause electric shock.
• Be sure to insert plugs fully and securely. Incomplete insertion may cause fire or electric shock.
• Do not disassemble or modify the AC adapter or cords. Doing so may cause fire or electric shock.
• Do not unplug or plug in the AC adapter with the instrument's power set to "ON" ( | ) Doing so may cause a malfunction.
Procedure
1
Make sure that the power switch of the FD-9 is set to off
().
2
Insert the output plug of the AC adapter power cord into
the power cord inlet of the AC adapter as shown.
3
Insert the output plug of the AC adapter into the AC
adapter inlet of the FD-9 as shown. Be sure the plug is
oriented correctly.
4
Insert the input plug of the AC adapter power cord into an
AC wall outlet.
• When disconnecting the AC adapter, make sure that the power switch is set to off
().
16