Attaching/Removing Paper Guide; Attaching; Removing - Konica Minolta FD-9 Instruction Manual

Attaching/Removing Paper Guide

❙ ❙
Paper Guide is used when test charts will be fed manually into the FD-9.
• If the Auto Sheet Feeder FD-A09 will be used, the Paper Guide should be removed.
• When the Paper Guide is not attached to the FD-9, it should be stored carefully where it will not be lost or broken.

Attaching

1
While gripping the ends of the Paper Guide, align the
hooks of the Paper Guide with the paper guide mounting
slots of the FD-9, and insert the hooks fully.
2
Slide the Paper Guide straight down until the Paper Guide
clicks in place.
• Be careful to slide the Paper Guide straight down. Twisting the Paper Guide or tilting
it away from the FD-9 may cause the hooks to be broken.

Removing

1
While gripping the ends of the Paper Guide, slide the
Paper Guide straight up.
• Be careful to slide the Paper Guide straight up. Twisting the Paper Guide or tilting it
away from the FD-9 may cause the hooks to be broken.
2
Remove the hooks from the paper guide mounting slots.
Preparations
13