Names And Functions Of Parts - Konica Minolta FD-9 Instruction Manual

Names and Functions of Parts

Cover
1
Paper guide mounting slots
2
Display panel
3
Up / down buttons
4
button
5
(Return) button
6
7 Power button
8 AC adapter input socket
9 LAN connection terminal
10 USB connection terminal
Auto Sheet Feeder alignment holes
11
Auto Sheet Feeder connector cover
12
Color measurement sensor unit
13
Base mounting screws
14
White calibration plate
15
10
For attaching the Paper Guide.
Shows instrument settings, status, error messages, etc.
For selecting items from the setting screen or making numerical settings.
For confirming selection or settings.
For entering the settings screen or returning from the setting screen.
For switching power on and off.
For connecting to the AC adapter
For connecting the instrument to a wired network.
For connecting the instrument to a computer via USB.
Moves back and forth during operation to scan the test chart.
These screws secure the instrument to its base. They can be loosened if necessary to
clear jammed paper (see p. 27) or for cleaning (see p. 30).
• Be sure that these screws are firmly tightened. If they are loose when
measurements are taken, measurement accuracy may suffer.
Used for performing white calibration.