Table of Contents
Advertisement
Settings screen
The settings screen shows instrument information, error messages, etc. and enables setting of some instrument settings.
Opening/closing settings screen
❙ ❙
If the settings screen is not shown, press
When the settings screen is shown, press
Settings screen layout
❙ ❙
The settings screen is divided into 4 main parts.
Selection area for selecting the item to view or set.
Value/setting area for displaying the value and changing the setting of the selected item.
Message area for showing messages related to operation of the display panel.
Key function description area describing the functions of the keys in the current operation.
Setting items
❙ ❙
Serial No.
Firmware version
MAC address
Network name
Display language
(See p. 26.)
DHCP
(See p. 22.)
IP address
(See p. 20.)
Subnet mask
(See p. 20.)
Default gateway
(See p. 20.)
SAVE DATA
24
to open the settings screen.
to close the settings screen and cancel any incomplete settings.
The serial number of the instrument. Not changeable.
The version of the FD-9 firmware. Not changeable.
The MAC address of the FD-9's network interface board. Not changeable.
The network name assigned to the FD-9. It can be set or changed from within the software. For details, refer to
the software instruction manual.
English
Japanese
Chinese (Simplified)
• Change is applied immediately after
ON: The network settings are automatically assigned using DHCP
off: Use of DHCP is disabled
IP address (xxx.xxx.xxx.xxx) set on FD-9. It can be set using the
software when FD-9 is connected.
• Disabled if DHCP is set to "ON"
• Changes made using the buttons are not applied until SAVE DATA is performed.
Subnet mask (xxx.xxx.xxx.xxx) set on FD-9. It can be set using the
software when FD-9 is connected.
• Disabled if DHCP is set to "ON"
• Changes made using the buttons are not applied until SAVE DATA is performed.
Default gateway (xxx.xxx.xxx.xxx) set on FD-9. It can be set using the
software when FD-9 is connected.
• Disabled if DHCP is set to "ON"
• Changes made using the buttons are not applied until SAVE DATA is performed.
Saves changes to network settings (DHCP, IP address, subnet mask, and default gateway), and reboots the
FD-9 to apply the new settings.
is pressed.
,
, and
,
,
buttons or from
, and
buttons or from
, and
buttons or from
Advertisement
Table of Contents
