Safety Precautions - Konica Minolta FD-9 Instruction Manual

Safety Precautions

To ensure correct use of this instrument, read the following points carefully and adhere to them. After you have read this manual, keep it
in a safe place where it can be referred to anytime a question arises.
WARNING
Do not use the instrument in places where flammable or
combustible gases (gasoline, etc.) are present. Doing so
may cause a fire.
Always use the AC adapter supplied as a standard
accessory or the optional AC adapter, and connect it to
an AC outlet of the rated voltage and frequency. If an
AC adapter other than those specified by KONICA
MINOLTA is used, it may result in damage to the unit,
fire or electric shock.
If the instrument will not be used for a long time,
disconnect the AC adapter plug from the AC outlet.
Accumulated dirt or water on the prongs of the AC
adapter's plug may cause a fire and should be removed.
Do not forcibly bend, twist, or pull the AC adapter
power cable. Do not scratch or alter the power cable or
place heavy objects on it. Doing so may damage the
power cable and cause a fire or electric shock.
Insert the power plug fully and securely. Incomplete
inserting may cause fire or electric shock.
CAUTION
Do not place the instrument on an unstable or sloping
surface. Doing so may result in its falling or
overturning, causing injury. Be careful not to drop the
instrument when carrying it.
Do not open the cover during scanning. If the cover is
opened during scanning, there is a risk that your hand
might get caught in the instrument, resulting in injury.
Failure to adhere to the following points may result in death or serious injury.
Do not disassemble or modify the instrument or the AC
adapter. Doing so may cause a fire or electric shock.
Take special care not to allow liquid or metal objects to
enter the instrument. Doing so may cause a fire or
electric shock. Should liquid or metal objects enter the
instrument, turn the power off immediately, disconnect
the AC adapter plug from the AC outlet, and contact the
nearest Konica Minolta-authorized service facility.
The instrument should not be operated if it is damaged
or the AC adapter is damaged, or if smoke or odd
smells occur. Doing so may cause a fire. In such
situations, turn the power off immediately, disconnect
the AC adapter plug from the AC outlet and contact the
nearest Konica Minolta-authorized service facility.
Always hold the plug itself when disconnecting the AC
adapter plug from the AC outlet. Pulling on the power
cable may damage it and cause a fire or electric shock.
Do not insert or disconnect the AC adapter plug from
an AC outlet with wet hands. Doing so may cause
electric shock.
Failing to adhere to the following points may result in injury or damage to the
instrument or other property.
Make sure that the AC outlet is located near the
instrument and that the AC adapter plug can be
connected to and disconnected from the AC outlet
easily.
When cleaning, disconnect the power plug. Cleaning
with the power plug connected may result in electric
shock.
1