Scan Measurement Chart Conditions - Konica Minolta FD-9 Instruction Manual

Scan Measurement Chart Conditions

The FD-9 can scan charts conforming to the following conditions:
Paper width
Paper length
Paper thickness
Minimum patch size:
Maximum number of patches per page
• Positioning markers are not necessary.
The layout of the chart on the paper must conform to the following layout. (See below.)
Minimum leading margin
Minimum tailing margin
Minimum side margins
Horizontal shift
32
45 to 330 mm
170 to 660 mm
0.05 to 0.45 mm
6 x 6 mm
A4-size paper: 1394
A3-size paper: 2928
23 mm
33 mm
4 mm
Within 150 mm of paper center line
\