Names And Functions Of Parts - Konica Minolta BC-10 Plus Instruction Manual

Names and Functions of Parts

1.
1. Measuring button
Press to calibrate or measure.
2. Operation keys
The keys are used to switch screens and to select, set, or save settings.
See page 21 "Instrument Operation/Display" for details.
3. LCD screen
Displays settings, measurement results, messages, etc.
4. READY lamp (blue)
Displays the measurement ready status when charging of the emission circuit is
complete.
14. 13. 12. 11.
3.
2.
4.
5.
6.
5. STATUS lamp (orange)
Illuminates the lamp when measurement fails, when the xenon tube is burnt out, when
operation cannot be performed, and for other error notifi cations.
6. Sample surface aperture
This is the aperture for measuring samples. The diameter of the opening can be
changed by replacing the target mask.
10.
7. Target mask
9.
The target mask is used for aiming.
8. Tripod socket
9. Battery compartment cover
This is the cover for the battery compartment. Four AA batteries can be inserted into
8.
the battery compartment according to the polarity indications within.
10. Protective connector cover
Protects the AC adapter socket and USB connection terminal.
7.
11. USB terminal
Used to connect the instrument to a PC or a printer (sold separately) when using the
supplied USB cable (IF-A25).
12. AC adapter socket
Used to connect the AC adapter connector plug when using the optional AC adapter
(AC-A308).
13. Strap holder
Used to attach the supplied wrist strap.
Memo See page 12, "Attaching the Wrist Strap", in this manual for how to attach
the wrist strap.
14. Power button
Used to turn the power ON/OFF. The power can be switched ON/OFF by pressing
and holding this button.
11