Setting Air Assist - Konica Minolta bizhub Press 1250P Additional Information

2
11
No change
12
Press [Lead Edge Trans. (Humid)] on the Process Adjustment Screen.
The Lead Edge Transfer for High Humidity Screen will be displayed.
% Select [Value Lead Edge Image], [Auto Select for Humidity], or [Value Separation].
This is set to [Value Lead Edge Image] under normal circumstances. If any trouble occurs in transfer
separation due to humidity, select [Auto Select for Humidity]. If this separation trouble occurs frequent-
ly, select [Value Separation].
% This selection will not affect the machine to stop due to inconformity in paper type. The machine
operates on the condition that [Value Lead Edge Image] is selected.
13
No change (correspond to the former step 12)
14
No change (correspond to the former step 13)
15
No change (correspond to the former step 14)
16
No change (correspond to the former step 15)
17
No change (correspond to the former step 16)
18
No change (correspond to the former step 17)
2.2.3

Setting Air Assist

This section selectively describes the changed step of the operation in setting Air Assist. See also "3.3.6 Set-
ting Air Assist" of [User's Guide - POD Administrator's Reference].
1
No Change
2
No Change
3
When you select [Tray 1], [Tray 2], or [Tray 3] to [Tray 8] of Paper Feeder Unit PF-706 for Paper Tray
and press [Change Set] to the right of "Air Assist," the Air Assist Screen will be displayed, as follows.
Select [Auto], [ON], or [OFF], as desired.
2-6 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Tray Setting - [Tray Setting] Operations 2.2