[01 Stapler (Main) Adjustment] - [01 Staple Position Adjustment] - Konica Minolta bizhub Press 1250P Additional Information

7
Menu Item/Description
04 Exit Guide Unit Paper Width Adjustment
Adjust alignment pitch of exit guide unit (front and
rear) in Finisher FS-532. Make adjustment if out-
put paper stack in the main tray is uneven in non-
stapled delivery.
7.4.2

[01 Stapler (Main) Adjustment] - [01 Staple Position Adjustment]

Adjust 2 position staple pitch and staple positions in staple finisher.
Objects of adjustment: 2 Position Pitch (120 mm), 2 Position Pitch (140 mm), 2 Position Pitch (165 mm), Rear
Diagonal, Rear Parallel, Front Parallel
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [02 Finisher Adjustment], [01 Stapler (Main) Adjustment], and [01 Staple Position Adjustment] in
sequence.
The Staple Position Adjustment Screen will be displayed.
3
Select [2 Position Pitch (120 mm)], [2 Position Pitch (140 mm)], [2 Position Pitch (165 mm)], [Rear Diag-
onal], [Rear Parallel], or [Front Parallel] to adjust the staple position.
4
Press [Print Mode].
5
Load A3 w / 11 × 17 w paper into a tray, then select that tray key.
% For Output Setting, [Staple] is automatically selected, and the staple position selected in step 3 is
selected. Set Number is automatically set to 2 copies.
6
Press Start on the control panel. A sample pattern will be output.
7-6 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Adjustment - Function Overview
Setting options
Objects of adjustment:
Full Area, 11 e 17 w, A3 w, B4 w,
8.5 e 14 w, A4 w, 8.5 e 11 w, B5 w,
8.5 e 11 v, A4 v, B5 v, A5 v, 5.5 e 8.5 v,
8 e 13 w, 8.125 e 13.25 w, 8.5 e 13 w,
8.25 e 13 w, 8K w, 16K v, 16K w,
12 e 18 w, A3W w, B4W w, A4W v,
B5W w, A4W w, B5W v, A5W v,
12 e 18W w, 11 e 17W w, 8.5 e 11W v,
8.5 e 11W w, 5.5 e 8.5W v, Custom,
SRA3 w, SRA4 w, 9 e 11 v, Postcard*
* Postcard is available in some areas only.
Adjustable range:
-50 (wide) to 50 (narrow) (1 step = 0.1 mm)
7.4