Stapler (Main) Adjustment] - [01 Staple Position Adjustment] - Konica Minolta bizhub Press 1250P Additional Information

5
5.15.6

[01 Stapler (Main) Adjustment] - [01 Staple Position Adjustment]

Adjust 2 position staple pitch and staple positions in staple finisher.
Objects of adjustment: 2 Position Pitch (120 mm), 2 Position Pitch (140 mm), 2 Position Pitch (165 mm), Rear
Diagonal, Rear Parallel, Front Parallel
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [02 Finisher Adjustment], [01 Stapler (Main) Adjustment], and [01 Staple Position Adjustment] in
sequence.
The Staple Position Adjustment Screen will be displayed.
3
Select [2 Position Pitch (120 mm)], [2 Position Pitch (140 mm)], [2 Position Pitch (165 mm)], [Rear Diag-
onal], [Rear Parallel], or [Front Parallel] to adjust the staple position.
4
Press [Print Mode].
5
Load A3 w / 11 × 17 w paper into a tray, then select that tray key.
% For Output Setting, [Staple] is automatically selected, and the staple position selected in step 3 is
selected. Set Number is automatically set to 2.
6
Press Start on the control panel. A sample pattern will be output.
7
Check the staple positions (a) of the output sheets.
% When [2 Position Pitch (120 mm)], [2 Position Pitch (140 mm)], or [2 Position Pitch (165 mm)] is se-
lected:
Allowance for [2 Position Pitch (120 mm)]: a = 120 +/- 3 mm
Allowance for [2 Position Pitch (140 mm)]: a = 140 +/- 3 mm
Allowance for [2 Position Pitch (165 mm)]: a = 165 +/- 3 mm
5-34 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Adjustment - Function Overview 5.15