Konica Minolta bizhub Press 1250P Additional Information page 45

2.2 Tray Setting - [Tray Setting] Operations
Press [OK].
4
When you select [Tray 3] to [Tray 11] of Paper Feeder Unit PF-703 for Paper Tray and press [Change
Set] to the right of "Air Assist," the Air Assist Screen will be displayed, as follows.
Select either [Auto] or [Manual].
Selecting [Manual] enables the following settings:
% Use [Weak] and [Strong] provided under "Lead" to select the desired air level within the range from
[1] to [9].
% Use [Weak] and [Strong] provided under "Side" to select the desired air level within the range from
[1] to [9]. Press [OFF] to turn off the air flow of the side.
% Press [Print Mode]. The specified tray will be automatically selected. Press Start on the control
panel.
% Press [Close]. Repeat the above adjustment procedures until appropriate feeding is confirmed.
% For Paper Feeder Unit PF-703, you can open the confirmation window for the air nozzle and modify
the air assist settings while visually checking feeding. For details, see "3.3.7 Air Assist Setting for
Paper Feeder Unit PF-703" of [User's Guide - POD Administrator's Reference].
Press [OK].
5
No Change
6
No Change
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
2
2-7