Konica Minolta bizhub Press 1250P Additional Information page 147

7.2 Tray Setting - [Tray Setting] Operations
7
Press [Process Adj.].
The Process Adjustment Screen will be displayed.
8
No change
9
No change
10
Press [Lead Edge Trans. (Humid)] on the Process Adjustment Screen.
The Lead Edge Transfer for High Humidity Screen will be displayed.
% Select [Value Lead Edge Image], [Auto Select for Humidity], or [Value Separation].
This is set to [Value Lead Edge Image] under normal circumstances. If any trouble occurs in transfer
separation due to humidity, select [Auto Select for Humidity]. If this separation trouble occurs frequent-
ly, select [Value Separation].
% This selection will not affect the machine to stop due to inconformity in paper type. The machine
operates on the condition that [Value Lead Edge Image] is selected.
11
No change (correspond to the former step 10)
12
No change (correspond to the former step 11)
13
No change (correspond to the former step 12)
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
7
7-3