Using The Head-Up Display - Lexus LS500 Owner's Manual

94
2-1. Instrument cluster

Using the head-up display

Enabling/disabling the head-up dis-
■
play
Press the HUD switch.
Changing settings of the head-up
■
display
The following settings can be changed
on of the multi-information display.
(→P.481)
 Brightness and vertical position of
the head-up display
Select to adjust the brightness or vertical
position of the head-up display.
 Hybrid System Indicator/tachome-
ter
Select to display the Hybrid System Indica-
tor, tachometer or no content.
 Display content
Select to enable/disable the following
items:
• Route guidance to destination/street
name
• Driving support system display
• Compass (heading-up display)
• Audio system operation status
*
: Make sure to enable this display when
using the driving support systems
LS500h_OM_OM50F42U_(U)
 Display angle
Select to adjust the angle of the head-up
display.
■ Enabling/disabling of the head-up dis-
play
If the head-up display is disabled, it will
remain disabled when the power switch is
turned off then back to ON mode.
■ Display brightness
The brightness of the head-up display can
be adjusted on
display. Also, it is automatically adjusted
according to the ambient brightness.
Head-up display automatic position
■
adjustment
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(→P.139)
■ When the 12-volt battery is discon-
nected
The customize settings of the head-up dis-
play will be reset.
WARNING
Caution for changing settings of the
■
head-up display
As the hybrid system needs to be operat-
ing while changing the settings of the
head-up display, ensure that the vehicle
is parked in a place with adequate venti-
lation. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
*
When changing the settings of the
■
head-up display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while the changing the settings of the
head-up display.
of the multi-information