Opening And Closing The Power Windows; 3-5. Opening, Closing The Windows And Moon Roof - Lexus LS500 Owner's Manual

3-5.Opening, closing the windows and moon roof
Power windows
Opening and closing the power
windows
The power windows can be opened
and closed using the switches.
Operating the switch moves the win-
dows as follows:
1
Closing
2
One-touch closing
3 Opening
4 One-touch opening
*
: To stop the window partway, operate the
switch in the opposite direction.
The power windows can be operated
■
when
The power switch is in ON mode.
When the driver's power window switch
■
is used to open a rear power window
(vehicles with rear door sunshades)
If a rear door sunshade is extended or being
extended when the driver's power window
switch is pushed, only the rear door sun-
shade will be retracted. To open the rear
power window from the driver's seat, push
the driver's power window switch again.
Operating the power windows after
■
turning the hybrid system off
The power windows can be operated for
approximately 45 seconds even after the
power switch is turned to ACCESSORY
LS500h_OM_OM50F42U_(U)

3-5. Opening, closing the windows and moon roof

mode or turned off. They cannot, however,
be operated once either front door is
opened.
■ Jam protection function
If an object becomes jammed between the
window and the window frame while the
window is closing, window movement is
stopped and the window is opened slightly.
■ Catch protection function
If an object becomes caught between the
door and window while the window is open-
ing, window movement is stopped.
■ When the side window cannot be
opened or closed
When the jam protection function or catch
protection function operates unusually and
the side window cannot be opened or
closed, perform the following operations
with the power window switch of that door.
Stop the vehicle. With the power switch in
●
ON mode, within 4 seconds of the jam
protection function or catch protection
function activating, continuously operate
*
the power window switch in the
one-touch closing direction or one-touch
opening direction so that the side window
can be opened and closed.
*
● If the side window cannot be opened and
closed even when performing the above
operations, perform the following proce-
dure for function initialization.
1
2
3
4
5
Turn the power switch to ON mode.
Pull and hold the power window switch
in the one-touch closing direction and
completely close the side window.
Release the power window switch for a
moment, resume pulling the switch in
the one-touch closing direction, and
hold it there for approximately 6 sec-
onds or more.
Press and hold the power window
switch in the one-touch opening direc-
tion. After the side window is com-
pletely opened, continue holding the
switch for an additional 1 second or
more.
Release the power window switch for a
moment, resume pushing the switch in
the one-touch opening direction, and
151
3